Special Ops Paintball: Q Loader - Special Ops Paintball

Jump to content


Page 1 of 1

Q Loader Rate Topic: -----

#1 User is offline   jak1544 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 5
  • Joined: 05-August 09
  • Brigade Name:jak1544

Posted 05 August 2009 - 09:41 PM

Hey guys, Can you fit a Q loader onto a a tippmann a5 with a RIS 45 degree sivel Bipod and a 416 shroud?
0

#2 User is offline   Tommikka 

  • Tom
  • PipPipPipPip
  • Group: Members
  • Posts: 811
  • Joined: 28-May 07
  • Gender:Male
  • Location:Salisbury, UK
  • Brigade Name:tommikka

Posted 07 August 2009 - 12:17 PM

View Postjak1544, on Aug 6 2009, 05:41 AM, said:

Hey guys, Can you fit a Q loader onto a a tippmann a5 with a RIS 45 degree sivel Bipod and a 416 shroud?

You have to remove the cyclone and fit an adaptor. So 'yes' as the fittings will be smaller and the shroud allows for a cyclone.

But you then have to mount the QLoader, if you want to mount the QLoader under the barrel and the bipod under the barrel then they will most likely get in each others way. So either forward fold the bipod or select an alternate QLoader mount layout, e.g. the QLOader can be mounted on the side.

This post has been edited by Tommikka: 07 August 2009 - 12:18 PM

0

#3 User is offline   jak1544 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 5
  • Joined: 05-August 09
  • Brigade Name:jak1544

Posted 08 August 2009 - 09:33 AM

But you then have to mount the QLoader, if you want to mount the QLoader under the barrel and the bipod under the barrel then they will most likely get in each others way. So either forward fold the bipod or select an alternate QLoader mount layout, e.g. the QLOader can be mounted on the side.
[/quote]

I saw a RIS rail adapter for the q loader can that be fitted on any rail? like a Tippmann A5 RIS Floating Hand Guard can you attach the adapter to the side?
0

#4 User is offline   Tommikka 

  • Tom
  • PipPipPipPip
  • Group: Members
  • Posts: 811
  • Joined: 28-May 07
  • Gender:Male
  • Location:Salisbury, UK
  • Brigade Name:tommikka

Posted 08 August 2009 - 02:18 PM

It can be mounted in a variety of ways. The standard fitting needs a vertical round mount. The CMS kit enables it to be fitted in a variety of ways, and other mods such as RIS give specific mounts.

For ideas check out the QLoader galleries:
http://www.qloader.com/pictures.html
http://www.qloader.com/gallery.html
0

#5 User is offline   Kheph 

  • Mackenzie's Dad
  • PipPip
  • Group: Members
  • Posts: 137
  • Joined: 29-July 07
  • Gender:Male
  • Location:St. Charles, MO
  • Brigade Name:Kheph

Posted 11 September 2009 - 06:43 AM

For all you Qloader Fans here....I have just created a group page on Facebook for All things Qloader. It was just started yesterday so there's not alot on it yet... I'm hoping that all of you choose to join up and feel free to post your pics and share some of your stories.....perhaps post some vids if you have them.
Tune in often for News and Updates from AIC, and from time to time you'll notice special deals on Merchandise popping up that will only be available to Qloader Facebook Fans!

http://www.facebook.com/home.php#/pages/Q-...03450286?ref=mf



Josh/Kheph

This post has been edited by Kheph: 11 September 2009 - 07:02 AM

Khephren
QLoader-Midwest Player Rep.



Proud to be a Christian!!!
0

#6 User is offline   Slivers 

  • The charred ghost of Slivers
  • PipPipPip
  • Group: Members
  • Posts: 454
  • Joined: 19-July 05
  • Gender:Male
  • Location:Where Monsters Are In Dreams
  • Brigade Name:Slivers

Posted 15 September 2009 - 10:55 AM

You can mount a Qloader on a Volkswagen. I wouldn't recommend it, though.
Posted Image
Flying straight above the steady stream of stars.
0

#7 User is offline   Tommikka 

  • Tom
  • PipPipPipPip
  • Group: Members
  • Posts: 811
  • Joined: 28-May 07
  • Gender:Male
  • Location:Salisbury, UK
  • Brigade Name:tommikka

Posted 16 September 2009 - 11:04 AM

View PostSlivers, on Sep 15 2009, 06:55 PM, said:

You can mount a Qloader on a Volkswagen. I wouldn't recommend it, though.

For a Volkswagen I would recommend a Warp feed and a custom built jumbo hopper.
0

Share this topic:


Page 1 of 1


Fast Reply

  

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users