as for the supressor, it was simple to make. its not a real supressor, just a mock. if i wanted to i could make it real but that just wouldnt be legal now would it.
the supressor is made out of a cheap flash light i found at a local doller store. i messured the langth i wanted, cut of the excess and hollowed it out. i then drilled out the screw in end to just slightly bigger than my barrel. 2 pvc fittings and a piece of pvc pipe are used to hold it to the barrel. then i used an O ring over the barrel and screwed the end cap on tight so that every thing stays in place. its realy simple to do, all it cost me was about $5.
This post has been edited by runningbear: 23 June 2007 - 03:33 AM