I just wanted to put it out there that I am looking to offer my services when it comes to building P90's for anyone interested.
The way the service works is in two ways.
1. I will build ION components into a P90 with the parts I have readily available.
2. Send me a donor ION that you already have and would like to have incorporated into the P90.
Also, if you have an existing P90 that would be fine to send or I can supply that. I am fine either way.
I will have videos and pics up soon.
My system will have the following features.
Bolt-out-back access, which will require NO tools to remove said bolt.
A reinforced body
A separate internal compartment for reinforcing circuit board housing.
An internal framework that supports all assemblies and binds shell.
There will hard points that bind the shell together, unlike the plastic points that screw together.
Microswitches at the rear of the gun will provide access to programing as well as on/off.
The barrel will be removable without having to take shell apart.
The feedneck can be rotated from either a 90 degree to a 45 degree position.
Contact me at: email@example.com for details and pricing.
This post has been edited by MovesLikeaShadow: 25 September 2010 - 01:31 PM