Special Ops Paintball: How To Take Apart Your Vibe - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

How To Take Apart Your Vibe How-To-Tutorial

#1 User is offline   GhillieMonstar 

  • The kid with a ghillie
  • PipPip
  • Group: Members
  • Posts: 87
  • Joined: 12-January 08
  • Gender:Male
  • Location:New Jersey

Posted 28 February 2008 - 02:02 PM

This is a how to tutorial for how to take apart a Smart Parts Vibe!

1.) First you have to get all your materials ready that what you need to dissemble (hex etc.)
Posted Image

2.) First take off the grip frame and unplug the battery.

3.) Then, you unscrew the asa bolts the big one is in the back and the little screw in front of the big screw. Put those screws aside.

4.) Then you need to screw apart the 3 main screws. The one is above the trigger the next is behind the grip frame and the next is in where you screw your barrel in.
Posted Image

5.) Then you slowly pull down on the Max Flow r vertical reg and then pull down the grip frame and while your are pulling watch out for the on and off button. Because it falls right out of it.
Posted Image

6.) Then you unscrew the board on the two silver screw holes and then take the off it comes wit the Max flow r vertical reg.
Posted Image
Posted Image

7.) Then you go to back and unscrew the bolt out of bolt and take it out.
Posted Image

8.) Then you unscrew bottom screw on feedneck all the way out and pull the feedneck right of the gun.

9.) Then you find a screw on the bottom of the body and you unscrew that and push out the mettle tube inside and you are left with all the gun taken apart.
Posted Image

Thanks for reading and I hope you learned how to take apart you Vibe from this tutorial.

0

#2 User is offline   Philipp122 

  • Senior Member
  • PipPipPipPipPip
  • Group: Members
  • Posts: 1,140
  • Joined: 10-November 06
  • Gender:Male
  • Location:Georgia
  • Brigade Name:Philipp122

Posted 28 February 2008 - 08:05 PM

I call sticky.

That's a good looking marker; I always notice that when I see these up close.
0

#3 User is offline   MadChild 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 195
  • Joined: 30-August 07
  • Gender:Male
  • Location:Davis County, Utah
  • Brigade Name:MADCHILD

Posted 01 March 2008 - 05:14 PM

Yeah I agree should be sticky, very nice for a Vibe newb like myself
The signature in this location has been removed due to FORUM RULES VIOLATIONS. Please check this link : FORUM SIGNATURE RULES AND REGS and feel free to repost your signature according to the guidelines set by this forum.

maximum size exceeded
0

#4 Guest_TM SNPR_*

  • Group: Guests

Posted 01 March 2008 - 05:19 PM

How to take apart a Vibe: see Ion
0

#5 Guest_PhantomAssassin_*

  • Group: Guests

Posted 01 March 2008 - 08:55 PM

View PostTM SNPR, on Mar 1 2008, 06:19 PM, said:

How to take apart a Vibe: see Ion

Pretty damn close...
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users