TIMMY HELP!!!! IM TRADING GUN TOMMOROW!!!&
Posted 08 March 2007 - 06:17 AM
thanks a ton
Posted 08 March 2007 - 03:12 PM
With the marker degassed, pull the bolt pin up a little take the bolt out the back and look down inside the slot where the bolt pin goes.
There is a groove in the RAM that the bolt pin sits in.
Slide the bolt in and line the pin up with the slot and push it down into the slot in the RAM.
A good way to see if you have the bolt in the right spot is to push the bolt forward and it will stop at the valve spring.
Push the bolt pin forward a little more and you will feel the valve spring compress, then push the bolt back a little as you release the forward pressure.
If you don't have the pin in the right place, the bolt will sometimes spit out of the marker when the ram moves back and forth and/or releases air up thru the body.
Hope that helps!
This post has been edited by Vern1: 08 March 2007 - 03:14 PM
Deadbox before Dishonor!
"We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the works of Shakespeare. Now, thanks to the Internet, we know this is not true."
Posted 09 March 2007 - 06:20 AM
am i missing a spring???
Posted 09 March 2007 - 01:50 PM
TREYisRAD Support! ~cor_man257 Matt senghing27 FusionV2/JK 207~ "Trey is Rad. nuff said." -cor_man257
Sponsored By: Planet Eclipse
DigitalPirate "Don't let Trey near the kid. Once he gets his hands on it, he'll sell it."