Anyway , he nabbed an Autococker . I wish I had pictures but here's a good description . The body was an FBM (Fireball Mountain) Vampyre body . Second one up from the bottom of this list :
Had a red Benchmark 45 Frame with : Smoke Dye Stickies , an FBM Power Angle bottom line Adapter , a Custom Products Rail and On/Off ASA (the power angle is mounted between the CP rail and frame ) . A Nickel Fatty Stabilizer screwed into the Verticle ASA . A red FBM Front block with a red Palmers micro rock regulator , Belsales 44 Magnum Ram (red) , red Belsales Hollowpoint Three-way (The hoses connecting the 3way , LPR , and Ram were also red , Ram also had Clippard QEV's ) , A Belsales Rex Hammer kit with IVG , AKA Tornado Valve , New Designz Low Pressure Chamber , The barrel was the barrel that came stock with an AGD Tac1 (Dye two piece ) .
Now here's the kicker . At the time I had the assembled back block off the marker and the Idiot left that behind . Not too mention that right beside the AC was a Tac1 and Blazer . Of the three , the AC was the most shiny . The day that the break in happened , I contacted every local field and for the next few weeks went to all pawn shops in the area , obviously never found it . I think it might still be floating around North central Indiana (Peru , Kokomo , Logansport , Marion areas) . I've kept watch over the B/S/T forums and Ebay , but haven't seen anything that remotely resembles it . Just thought I'd let the community know . Besides , with the economy in a slump , it just might show up in an unexpected place .
This post has been edited by Guardian: 15 June 2009 - 06:39 AM