LVL 10: Doesn't Fire. No Leaks, Airs Up, Bolt "clicks", pressure behind trigger.
Posted 26 March 2008 - 04:53 PM
Posted 26 March 2008 - 04:55 PM
Posted 26 March 2008 - 05:23 PM
No, I just pulled the bolt off the back. I didn't touch the frame or the rail.
Posted 27 March 2008 - 08:24 AM
Yes, but here is the thing. It seems to be requiring much higher pressure then the other Automag I have used with a LVL 10 on. I started turning the velocity screw pulling the trigger the whole way until I got it to fire. I am about 1 turn away from the screw being all the way in. I have never had it that tight before on other mags. The problem is it now is slightly leaking out the back. I have the medium spring in.
Also, when testing anti chop with a squeegee it seems to take quite a bit of force to stop of the bolt. I think how it is now it is going to cut right through a paintball. Is it just in my head? I have a 2.0 carrier and 2 shims.
Posted 07 April 2008 - 04:51 PM
However, now when I feed ANY balls into the marker the bolt stops and vents as if it is anti-chopping. It will keep doing this trigger pull after trigger pull. I cannot get it to actually fire a ball. The bolt does reset.
I have tried 0-3 shims in there. Don't know what to adjust or tweak now, any help? As I mentioned above in this post as well there is a bran new regulator piston assembly in there too.