Special Ops Paintball: barrel oring? - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

barrel oring? Rate Topic: -----

#1 User is offline   nighthawk4 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 75
  • Joined: 05-March 08
  • Gender:Male
  • Location:California
  • Brigade Name:nighthawk4

Posted 31 May 2008 - 02:11 PM

I just noticed in the barrel adapter of my a5 that there is a small groove inside that is supposed to be for a barrel oring. In the parts diagram it says there is barrel oring but i don't know if it's refering to the oring on the outside. If it's something i should have, please point me in the direction of a website where i could buy it.
(\__/) This is bunny. Copy and paste
(='.'=) bunny into your sig. to help
(")_(") him gain achieve domination!
0

#2 User is offline   KRA SHARPSHOOTER 

  • [ Doglegs of War ] ~Silent But Deadly~
  • PipPipPip
  • Group: Members
  • Posts: 422
  • Joined: 18-August 07
  • Gender:Male
  • Location:New Prague, MN
  • Brigade Name:KRA SHARPSHOOTER

Posted 02 June 2008 - 07:35 AM

You should have two slots on your Barrel Adapter. The slot towards the barrel should have an O-Ring & the second slot towards the marker is for locking the Adapter in place. No O-ring goes here! There is supposed to be an O-ring inside the Barrel Adapter about 1/4 of an inch back from the threads towards the marker. I believe this O-ring is part #02-40.

I'd contact Tippmann first and see if they will send you a new o-ring. Otherwise you could check Tippmannparts.com and see if they have it, but you might have to buy the whole barrel adapter from them.

KRA SHARPSHOOTER's A-5 - [ Doglegs of War ] - ~Silent But Deadly~ - Archive of Wisdom - Online Discount Codes
"I don't play Woodsball because I have an A-5, I have an A-5 because I play Woodsball" - KRA SHARPSHOOTER
0

#3 User is offline   nighthawk4 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 75
  • Joined: 05-March 08
  • Gender:Male
  • Location:California
  • Brigade Name:nighthawk4

Posted 02 June 2008 - 09:03 AM

thanks a lot for clearing that up for me. I just made an order from tippmannparts and the oring kit in the order has the barrel oring in it.

This post has been edited by nighthawk4: 03 June 2008 - 12:22 PM

(\__/) This is bunny. Copy and paste
(='.'=) bunny into your sig. to help
(")_(") him gain achieve domination!
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users