My new deadly wind bolt for the ion. Dirty Acronym!
Posted 16 January 2008 - 08:18 AM
"Marketing hype in paintball?! The nerve of some people. After all, we paintballers would never throw our hard earned cash into the magic box of marketing hype."
Posted 16 January 2008 - 04:34 PM
Well its leaking out of the barrel so i am almost positive thats the reason i just needed someone elses opinion.
Posted 16 January 2008 - 05:58 PM
In the instructions you can find on the DW website it warns that they almost make the inner O-ring (the one on the stalk) too small because they expect it to swell when you lube it.
so after lubing up the inner o-ring with some Sl33k (PLEASE don't use any oil of any kind) as well as the two outer o-rings and air it up. If it still leaks after that apply a little bit more lube to the inner o-ring. If it persists after that then gently stretch out the inner o-ring (just a little)
also check to make sure that big plastic ring you have is fitting properly and in the right place (pretty sure its flat side facing up)
This should fix you right up, and if it doesn't then feel free to PM me and I'll do whatever I can to help ya out. I own this Bolt and it is amazing and will work wonders for you once you got it up and running right.
This post has been edited by Galihad: 16 January 2008 - 06:00 PM
My feedback!:click here