Engler A-5 M4 Mag with Mount My personal disaster
Posted 02 May 2006 - 08:41 AM
Firstly, there are no instructions... not that it takes a rocket scientist to figure it out, but couldn't hurt to have.
Secondly part of the Mag was bent outward from the drilling done at Spec Ops (or where ever they drill the holes in these things) which caused some scratching of the mag and mount while needing to forcefully push the mag into the mount. (I finally took a screw driver and bent it back myself which helped.) Thirdly, the holes in the mag don't line up with the holes on the mount. These holes aren't off just a little, they required more drilling on my end. This was done before I realized that the screws that are meant to go from one side of the mount, through the magazine, and out the otherside of the mount to securly hold the mag in place with nuts, aren't long enough to actually protrude through the other side of the mount, leaving no threads to attach the nuts to.
I have a scratched magazine, and scratched up mount, niether of which are finally attached to my marker. I'm still testing ways to ghetto rig the mag/mount onto my gun.
Posted 05 May 2006 - 12:35 PM
This post has been edited by questionful: 05 May 2006 - 12:37 PM
Posted 10 August 2006 - 09:26 PM
Posted 02 March 2007 - 04:16 PM