SP-1 won't fire.
Posted 04 May 2009 - 01:14 PM
I've been trying to figure out what is wrong with this gun, I have an A-5 and got this for my little brother (he's 8 and wants to paintball). Now I've had this gun working for about 8 months. I replaced the battery, load up the tank/hopper have it set too CO2 but when I go to fire nothing.
I can hear air coming out of the gun, near the trigger area. weird thing is, yesterday when I took the tank off, I was holding the trigger and a paintball did shoot out..Just don't know what's going on.
Posted 04 May 2009 - 06:22 PM
if it is the Banjo fitting where could I get another part, and how would I install it, the gun guide doesn't show how to take the gun apart, just how to clean it.
Posted 04 May 2009 - 06:33 PM
You Can't Wipe A Welt
Yeah My Gun Has PSP...Pump Shoot Pump
Posted 04 May 2009 - 07:04 PM
but the bolts and stuff are all wrong for the SP1, I can't even get the grip off of the gun.. >.< this is getting annoying.
Posted 14 May 2009 - 07:22 PM
I have an SP-1, once in a long while I will pull the trigger and the gun won't fire, but it is because the battery is either low, or the gun is about to release excess pressure out of the relief valve.