Stock WGP Prostock not Firing Help Please
Posted 10 August 2009 - 11:12 AM
Posted 10 August 2009 - 11:19 AM
.............. and of course the first thing to look at ..... bolt is in upside down.
Posted 10 August 2009 - 11:51 PM
few things to look at...
1. Like slink said, is the bolt upside down? Most common mistake, EVERY cocker owner does it at least once. Check that first, simple and easy fix.
2. Did he recently redo the macro/steel braided to the regulator from the ASA? If he put the input hose into the reg in the output hole, instead of the proper input hole, it will just bypass the reg entirely. Now the hammer is trying to hit against the valve, which is now being held shut by 800+ psi, whereas before it was only being held by 400 psi. A big difference in power needed to hit the valve to open it.
3. Did you rebuild the reg recently? Any clogs in it?
4. How far is the IVG screwed in? 2-3 turns is a good place to start.
5. What's the reg set at?