Special Ops Paintball: Proto SLG review - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Proto SLG review Rate Topic: -----

#1 User is offline   SN toter 

  • Yes, I had a Super Nova
  • PipPipPip
  • Group: Members
  • Posts: 556
  • Joined: 16-March 05
  • Gender:Male
  • Location:Pittsburgh
  • Brigade Name:SN TOTER

Posted 25 November 2008 - 12:53 PM

SN toters Proto SLG Review

At first glance the low cost electro market is flooded with high end wannabes. The SLG is not one of them. I was in the market for a backup to my AGD E-Tac One and sleek lines and cost of the SLG got my attention. I placed my order and 3 days later Fedex delivered.

I was impressed before I even saw the marker. Once I opened the shipping box I pulled out a beautifully packaged and incredibly small box. I really couldn't believe that it housed a paintball marker it was so small. Said box was very well designed with trendy graphics and a slick finish. I have never seen such nice packaging for a paintball marker.

Upon opening the work of art, I was greeted by the SLG itself, sitting snugly in molded foam. I removed the marker and found another layer of foam below hiding the user manual, Dye slick lube, barrel sock, Proto battery, warranty card, an allen key set, and a full parts kit with a complete set of orings and new spring detents. I read through the user manual and was impressed with it as well, it was just as well designed as the packaging box with color diagrams on glossy paper.

Onto the marker itself. I chose dust olive for the color of my SLG and to be honest, it's more of a bronze. The finish of the body is excellent and there are no visible mill or tool marks under the anodizing. I can see why they call this the 'Super Light Gun'. I expected it to be light but not that light. Very impressive. The gripframe is a high test polymer that has a nice fit and finish, it does not have that 'cheap' feel like some composites that other companies use. I was also pleasantly suprised to find the marker wasn't shipped from the factory dry, it was already lubed and the internal aluminum parts were finished with no alumninum burrs or shavings that you can find in some lower cost new-in-box markers.

After installing the 9volt barrery I applied the included barrel sock, aired the marker up, and turned it on. I was impressed with how well balanced the SLG is with an HPA tank and a full hopper. It is very maneuverable and comfortable. I went through several pods of paint to begin breaking in the reg before my day of play. The marker has a very slight amount of kick and cycles very smoothly. One of the first things I notices was that as it is a sear-tripper(the electronic solenoid trips a mechanical sear, much like an E-mag) the solenoid clicking is considerably louder than a solenoid in a fully electro-pnuematic marker. With paint, however, this marker is not unusually loud, in fact with an after market barrel that has more porting than the stock barrel, the SLG was quite quiet.

The stock trigger is made of polymer and is a little stiff for me stock but is very easily adjustable. There are two set screws to adjust the travel of the trigger itself and a trigger sensitivity adjustment that can be made through the circuit board. In a few minutes I had the trigger right where I wanted it. The feedneck is not a clamping feedneck. It uses inset orings to pressure hit hoppers on. While this is better than a lot of stock feednecks, I would recommend upgrading to a clamping feedneck and an aluminum roller bearing trigger, any matrix feedneck will work and there are several after market SLG triggers on the market.

The stock board is more than capable. It is very easy to program and the manual takes you step by step through the process. You can adjust the firing modes, balls per second, and trigger sensitivity. The LED and buttons on the back of the gripframe, along with the trigger, make programming and operating the electronics a breeze. Other stock options include a Dye Hyper 3 reg that is incredibly consistant and comfortable, and a very nice rail based air source adapter(ASA) with macroline hose and fittings.

In play with matched paint this marker is extremely consistent and efficient. Proto quotes this at 1500 shots from a 68ci 4500psi HPA tank and I don't think that's an exaggeration. I was very impressed with the efficiency. Out of the box at the chronograph I was getting +-3 fps. After shooting over a case of paint(2000 rounds per case) I chrono'd again(Proto advises that it takes about 2000 cycles to break in the Hyper 3 regulator) and was getting +-2fps. Impressive. They eyes were great and I had no double feeding, breaks, or jams shooting the SLG at various rates of fire and holding it at different angles.

All in all? The SLG performs great out of the box. A couple upgrades(roller trigger and clamping feedneck), and this is my ideal marker. It truly is high performance marker at a low cost. It is a comfortable, affordable, fast, sleek, and quality marker. Kudos Proto, you just gained a fan.

***
It should be noted that the first run of the SLG marker had a couple reported bugs that Proto has since corrected. There were some reports that the SLG bolt was about one millimeter short leading to rollback and also reports of the spring detents wearing out. These issues were quickly addressed by the manufacturer and new SLG's do not have these problems.

Stock:
Posted Image

With Angel Barrel kit, trinity feedneck, and an on off asa:

Posted Image
Posted Image
0

#2 User is offline   Chad the man 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 35
  • Joined: 21-May 08
  • Gender:Male
  • Location:California
  • Brigade Name:cyberdelight

Posted 25 November 2008 - 01:17 PM

I have the same color. I bought a dye feed neck and a on/off too. It's a great gun and so light. I like it.
feedback+2/-0日本人プライド
0

#3 User is offline   HoboHunter 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 20
  • Joined: 21-November 08
  • Brigade Name:HoboHunter23

Posted 04 December 2008 - 08:51 AM

I have looked at a few websites that sell Proto SLG's. Action Village has 2 different types of SLG's, one is an SLG UL, and the other is just an SLG. What's the difference? I thought it meant ultra-light, but when i looked at the specs of both, they both weighed the same. I currently have an A5, and its supposed to be really durable, buts it takes so long to take it apart and put together, its just not practical. How's the SLG's durability and maintenance? I've also read you bought an on/off ASA, whats the difference between that and a normal ASA? Also, how does the different feedneck make a difference?

Sorry, im kind of a paintball noob!!
0

#4 User is offline   Ragedman 

  • There's my chip chip.
  • PipPipPip
  • Group: Members
  • Posts: 571
  • Joined: 05-August 05
  • Gender:Male
  • Location:Fiesta Bowl Champs
  • Brigade Name:I have one, used it once...like π years.

Posted 04 December 2008 - 12:20 PM

View PostHoboHunter, on Dec 4 2008, 08:51 AM, said:

I have looked at a few websites that sell Proto SLG's. Action Village has 2 different types of SLG's, one is an SLG UL, and the other is just an SLG. What's the difference? I thought it meant ultra-light, but when i looked at the specs of both, they both weighed the same. I currently have an A5, and its supposed to be really durable, buts it takes so long to take it apart and put together, its just not practical. How's the SLG's durability and maintenance? I've also read you bought an on/off ASA, whats the difference between that and a normal ASA? Also, how does the different feedneck make a difference?

Sorry, im kind of a paintball noob!!


The utra-lite SLG has the new grip frame on that is narrower than the plain SLG, I also believe it is their newer version offered and Proto no longer makes the plain SLG. SLG is easy to maintain, bolt just screws out the back and eye plates are easliy removed to clean. The normal ASA doesnt have an on/off so you have to take the HPA off in order to get all the air out of the marker were as you can just turn it on/off. SLG feedneck is terrible, its to tall and to big for most hoppers. An easy way to counter it to put an o-ring the space between the hopper and the feedneck. Or just buy a new low rise clamping feedneck for $25 or so.
0

#5 User is offline   Lomarandil 

  • SPPL Junkie -- BlackLight Company
  • PipPipPipPipPip
  • Group: Members
  • Posts: 2,181
  • Joined: 18-August 05
  • Gender:Male
  • Location:Pueblo / Golden, CO
  • Brigade Name:Lomarandil

Posted 04 December 2008 - 03:33 PM

Actually Raged, the 09 comes with a nice clamping feedneck

I just got a UL SLG yesterday, I'll have a review up in the next few days, so stay tuned.

0

#6 User is offline   SN toter 

  • Yes, I had a Super Nova
  • PipPipPip
  • Group: Members
  • Posts: 556
  • Joined: 16-March 05
  • Gender:Male
  • Location:Pittsburgh
  • Brigade Name:SN TOTER

Posted 10 December 2008 - 10:57 AM

Yeah guys I got my SLG in early 08 - well before they came out with the ULT version so a better asa and clamping feedneck was not a stock option at the time.
Posted Image
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users