Special Ops Paintball: BUZZING - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

BUZZING deals with pressure

#1 User is offline   GUN SLINGER 

  • Sophomore Member
  • PipPipPip
  • Group: Members
  • Posts: 643
  • Joined: 09-October 05
  • Location:Lutz,Florida
  • Brigade Name:GUN SLINGER

Posted 25 November 2007 - 03:53 PM

ok i had my reg pressure at 200 and it started buzzing. so i lowered the reg pressure down to about 150-160 and the buzzing stoped. but now the gun dont shoot right and it dont sound like the bold it cycling right
Religion is an insult to human dignity. With or without u would still have good men doing good things and evil men doing evil things. But for good men to do evil things... That takes Religion
0

#2 User is offline   Sp.Ed 

  • Junior Member
  • PipPipPipPip
  • Group: Members
  • Posts: 992
  • Joined: 21-February 07
  • Gender:Male
  • Location:McMurdo Station Antarctica

Posted 25 November 2007 - 04:26 PM

Is this on your A5 also?
The opinions and statements expressed on this site are mine alone and are not sanctioned or approved by my Employer. I also assume all legal liability for those statements.
0

#3 User is offline   Galihad 

  • Senior Member
  • PipPipPipPipPip
  • Group: Members
  • Posts: 1,027
  • Joined: 25-July 07
  • Gender:Male
  • Location:Oklahoma
  • Brigade Name:Galihad

Posted 25 November 2007 - 05:32 PM

well if its an ion thats your whole problem right there, since its only made to handle a max of 200PSI and then it starts wigging and you risk blowing microline, and possibly your noid...

if its not an Ion well..... good luck to you!
Christian paintballers -beating the hell out of satan with tiny balls-
Sabre #117
My feedback!:click here
0

#4 User is offline   Philipp122 

  • Senior Member
  • PipPipPipPipPip
  • Group: Members
  • Posts: 1,140
  • Joined: 10-November 06
  • Gender:Male
  • Location:Georgia
  • Brigade Name:Philipp122

Posted 26 November 2007 - 05:29 AM

View PostGalihad, on Nov 25 2007, 07:32 PM, said:

well if its an ion thats your whole problem right there, since its only made to handle a max of 200PSI and then it starts wigging and you risk blowing microline, and possibly your noid...

if its not an Ion well..... good luck to you!


You have to raise your pressure well over 230 psi to damage the 'noid or even any hoses inside the marker right away. The hoses might pop of after 200 psi, but the main reason you are supposed to keep your pressure below 200 is because anything above that stresses the internal parts and may cause damage after a lot of playing time.

I'm not sure what you mean by buzzing. I've never heard of that. First, disassemble the whole thing, make sure to change the battery, and maybe try raising the dwell to eliminate that as a possiblity. If that doesn't fix it, come back here.
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users